Copyright © 2019 Shellrus LLC. All rights reserved.

Website version 10.1

REV 12/12/2019

Please keep this product away from children. we recommend you to wash your hands with hand soap after installation.

Text version of the installation guide

Thank you for choosing Shellrus 3d pro. In this video, I’m gonna walk you through the complete installation process.

Before we start, please notice:

  1. The installation process takes about 10 minutes, please make sure to avoid direct sunlight and dusty environment.

  2. The Jelly Glue is liquid before UV curing, Jelly Glue can be cleaned with alcohol or soap. Do not use our product if your phone is no longer waterproof. 

  3. The UV light has micro USB and USB-C ports, please prepare the power source before installation.


Now let’s get started.

  1. Place your phone on a level surface, you may put the provided cardboard at the bottom of your phone. You may cover the openings on your phone with tapes.

  2. Use lens wipe and dust sticker to clean the screen, then place the installation frame on the phone. 

  3. Pour the Jelly Glue in the middle of the screen. Please make sure that you use the whole piece of glue for each installation.

  4. Double check to make sure there’s no bubble in the glue. Then clean the glass thoroughly, lay it down slowly to get contact with the glue. Then release the glass and position it properly. 

  5. Please pause the video and wait for the glue to walk through the entire screen, this process takes about 30 seconds. If you see bubbles trapped on the curved edge, you can carefully press that area to force the bubbles out. 

  6. Connect the UV light to the power source. First, we cure the middle of the screen for 7 seconds, then use oil wiper to gently wipe off the excess glue around the edge of the screen. Next, use the UV light to cure the entire screen for 1min and 30seconds. Please move the light around the phone to make sure not to miss any spot.

  7. Use the alcohol pad and oil wiper to clean the phone thoroughly. If you see the glue in your ear speaker, pick it out and clean the ear speaker with alcohol. If you have any question, please contact our customer service team.


The removal process is the same as any other screen protectors. Since Shellrus tempered glass fits the screen perfectly, removal may be easier with the help of pry tool contained in the box.

Thank you again for choosing us.